Can I seal laminate additionally?
Once laminate flooring has been laid, the question often arises as to whether the floor should also be sealed afterwards. We can reassure you: this is possible. Laminate flooring from LOGOCLIC® consists of more than 90 percent wood-based material and is thus susceptible to moisture. Although the impregnated overlay protects the floor from penetrating moisture, moisture can still be absorbed from the floor via the joints. This could result in swelling. You can remedy this problem with LOGOCLIC® sealant!
Sealing laminate – it’s that easy
One sealing option is to use glue. This seals the joints and bonds the panels at the same time. It is important to remember that this means a permanent bond of the laminate that cannot be easily removed later.
LOGOCLIC® Clickguard™, on the other hand, reliably seals the joints but does not bond. This provides perfect protection against moisture penetration, but it can still be re-installed without any problems. Laminate floors treated with Clickguard™ can be easily removed and reused.
